Production standards:
High coating adhesion, no spalling of coating, no micro chipping of cutting edge, Five inspections to ensure production standards.
Five inspections:
→1. Mixed material inspection. → 2. Blank inspection after pressing. →3. Blank inspection after sintering.
→4. Blank inspection before coating. →5. Full inspection of finished product after coating
Grade recommendation | Grade Introduction | Always stock available | Vc | Fn | Ap |
YC331 | 1. High wear resistance substrate 2. Thick AL2O3 coating 3. Improved impact toughness 4.substantially improved wear resistance 5.the first choice for steel general machining. | SNMG120404-PMF | 200(160-320) | 0.2(0.05-0.4) | 1.0(0.1-2.0) |
SNMG120408-PMF | 200(160-320) | 0.2(0.05-0.4) | 1.5(0.5-2.5) | ||
CNMG120412-PMF | 200(160-320) | 0.2(0.05-0.4) | 3.0(1.5-4.0) | ||
YC333 | 1. High wear resistance substrate 2. Thick AL2O3 coating 3. Improved impact toughness 4. substantially improved wear resistance 5. the first choice for steel general machining. | CNMG120408-PMF | 200(160-300) | 0.2(0.05-0.4) | 1.0(0.1-2.0) |
CNMG120408-PMF | 200(160-320) | 0.2(0.05-0.4) | 2.5(1.0-3.0) | ||
CNMG120412-PMF | 200(160-320) | 0.2(0.05-0.4) | 3.0(1.5-4.0) | ||
Matching tool holder | |||||
MSBNR/L | MSKNR/L | MSDNN | S Type-MSKNR/L |